Setup Procedures

leg MMGG

To properly install the printer paper into the termial, read the following steps carefully.

Step-by-Step

To load the printer paper in the ICE 5500:

1. Open the printer paper cover on the back of the ICE 5500 printer.

Figure 3-4. ICE 5500 printer paper door open

2.Place the paper roll into the printer paper holder, make sure the printer paper unrolls from under the roll, not over the top, and has a straight-line path into the printer paper-feed mechanism.

3.Place the end of the paper in the paper guide. The printer then automatically feeds the paper. If the printer does not automatically feed the paper, proceed with step 4. Otherwise, proceed to step 10.

940184-003, rev. B

Hypercom Corporation

3-7

Page 35
Image 35
Hypercom ICE 5000 manual Leg Mmgg