IBM 3301690 user manual Driver Installation, Figure D-3 Sound Effect Manager Icon

3301690 CPU Card

The audio kit comes with a PCI slot bracket for the installation into a PC case or rackmount chassis. Connect the 10-pin header to the 3301570’s AUDIO1 header as shown in Figure E-1, and if necessary, connect the CDIN1 and AUXIN1 to optical drives or other audio sources, e.g., an MPEG card, using a 4-pin cable. Note that depending on the devices you connect to, the phone jacks have different functions with different audio installation modes (2 channel or 5.1 channel modes).

D.3 Driver Installation

The driver installation has been described in Chapter 6, Section 6.4.

After reboot, you should be able to find the sound effect configuration utility in Windows Control Panel (see Figure D-3); and if peripheral speakers have been properly connected, hear the sound effects.

Figure D-3: Sound Effect Manager Icon

159