3301690 CPU Card
Note that the selection in this menu item will only be effective if the device is accessed through the BIOS.
ÎIDE Detect Time Out (Sec)
IDE Detect Time Out (Sec) allows you to select the timeout value for detecting ATA/ATAPI devices. The default [35] is recommended. The timeout value options are:
„0
„5
„10
„15
„20
„25
„30
„35 (Default)
ÎATA (PI) 80Pin Cable Detection [Host & Device]
Î | Host & Device | (DEFAULT) Uses the host and device to detect the |
| ||
|
| ATA(PI) cable |
Î | Host | Uses the host to detect the |
| ||
Î | Device | Uses the device to detect the |
|
5.3.2.1 IDE Master and IDE Slave
IDE Master and IDE Slave configuration options for both primary and secondary IDE devices are shown in the BIOS menu below.
85