3301690 CPU Card
5.1 Introduction
A licensed copy of AMI BIOS is preprogrammed into the ROM BIOS. The BIOS setup
program allows users to modify the basic system configuration. This chapter describes
how to access the BIOS setup program and the configuration options you may change.

5.1.1 Starting Setup

The AMI BIOS is activated when you turn on the computer. The setup program can be
activated in one of two ways.
1. Press theD
ELETE
key as soon as the system is turned on or
2. Press theD
ELETE
key when the “Press Del to enter SETUP” message
appears on the screen.
If the message disappears before you respond, you must restart your computer and try
again.

5.1.2 Using Setup

Use the arrow keys to highlight items, press E
NTER
to select, use the PageUp and
PageDown keys to change entries, press F1 for help and press E
SC
to quit. Navigation
keys are shown in.
Key Function
Up arrow Move to previous item
Down arrow Move to next item
Left arrow Move to the item on the left hand side
Right arrow Move to the item on the right hand side
Esc key Main Menu – Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu --
Exit current page and return to Main Menu
Page Up key Increase the numeric value or make changes
Page Dn key Decrease the numeric value or make changes
F1 key General help, only for Status Page Setup Menu and Option
Page Setup Menu
76