IBM 3301690 Serial Port Number COM1, COM2, Serial Port Mode 115200 8,n,1, Flow Control None

3301690 CPU Card

„ VT-UTF8 Combo Key Support These configuration options are discussed below.

ÎSerial Port Number [COM1]

Î	COM1 (DEFAULT)	If selected the system can be remotely accessed through
		COM1
Î	COM2	If selected the system can be remotely accessed through
		COM2

NOTE: Make sure the selected COM port is enabled through the Super I/O configuration

menu.

ÎSerial Port Mode [115200 8,n,1]

The Serial Port Mode designates baud rate through which the console redirection is made. The following configuration options are available

„115200 8,n,1 (DEFAULT)

„57600 8,n,1

„38400 8,n,1

„19200 8,n,1

„09600 8,n,1

NOTE:

Identical baud rate setting must be set to the host (a management computer running a terminal software) and slave (the ICPMB-8550 system being remotely accessed)

ÎFlow Control [None]

This selection selects the flow control for the console redirection.

98