IBM 4610 T7161 Fiscal unit failure, T9501 Length of input incorrect. Re-enter, User Response

(GY27-0366) April 3, 2003

T7161 Fiscal unit failure

Explanation: A problem is detected in the fiscal memory.

User Response: Switch POWER OFF and service the fiscal printer.

T9501 Length of input incorrect. Re-enter.

Explanation: A date or closure number that was entered for the dump is not valid.

User Response: Re-enter the correct dates or closure numbers.

T9502 Invalid password

Explanation: The password that was entered is not valid.

User Response: Re-enter the correct password.

T9503 No data available

Explanation: There is no dump data available for the dump request you entered.

User Response: Re-enter different dates or closure numbers.

T9504 Display error - OR - T9504 Display configuration error

Explanation:

1.A problem is detected in the point-of-sale display.

2.A problem is detected in the configuration for the point-of-sale displays. Two displays must be configured with a

combination of:

vAlphanumeric

vOperator display

vShopper display

User Response:

1.Check that two of the correct displays are configured.

2.See Set Display Address as Configured.

3.Run diagnostics on the displays.

T9505 Print in process. Please wait.

Explanation: The printer is currently printing a dump request.

User Response: Re-enter your request after the printing completes.

T9506 Enter lower closure number: NNNN

User Response: Enter the lower closure number of the dump range.

T9507 Enter upper closure number: NNNN

User Response: Enter the upper closure number of the dump range.

T9509 Enter start day and month: DDMM

User Response: Enter the start day and month of the dump range.

T9510 Enter end day and month: DDMM

User Response: Enter the end day and month of the dump range.

184610 - Kxx Fiscal Printer Service Supplement