IBM 600X (MT 2646) manual Hibernation mode, For, While docked, Switch

Related service information

behavior is independent of the operating sy So, if you have set the low-battery alarm, computer may not do what you specified. I chooses either your setting or the default whichever is appropriate.

Any one of the following events causes the comput resume operation from suspend mode:

Ÿ	The Fn		key		is	pressed.
Ÿ	The	LCD		cover		is	opened.
Ÿ	The	ring		indicator			(RI) is	signaled by a se
	or	a	PC	Card		device.
Ÿ	The	power			switch		is turned	on.

ŸThe resume timer is set. In Windows 98, the

Scheduled Tasks setting has priority over the

Resume on timer selection in the “Power Management Properties” window.

Note: The computer does not accept any input immediately after it enters suspend mode Therefore, wait a few seconds before any action to reenter operation mode.

Hibernation mode

	Note	for	the	Windows NT
A	Windows		NT	user cannot create a hibernation f
a	Windows		NT	system that uses the NTFS format
system,		the		Windows	NT default format. If you
to	use	hibernation			mode, you should reinstall Wi
NT	with	a	FAT	format	system.

In hibernation mode, the following occurs:

ŸThe system status, RAM, VRAM, and setup data

stored on the hard disk.

ŸThe system is powered off.

Notes

1.In the ThinkPad Configuration program, the computer can be setsuspend/hibernateto

while docked.

2.The computer cannot enter hibernation mode when it is powered with ac power and a communication PC Card is used.

Any one of the following events causes the comput enter hibernation mode:

Ÿ The Fn + F12 keys are pressed.

ŸThe Hibernation button is selected in the Fuel-G program.

Ÿ The	power	switch is	turned off and the mode
Power	switch	mode [Hibernation]	.

6 ThinkPad 600X Hardware Maintenance Manual