Locating the connectors on the rear of your computer | IBM 6824

Locating the connectors on the rear of your computer

The following illustration shows the locations of the connectors on the back of the computer.

1	Power connector	9	Ethernet connector
2	Mouse connector	10	Microphone connector
3	Keyboard connector	11	Audio line out connector
4	USB connectors	12	Audio line in connector
5	Serial connector	13	AGP slot (some models)
6	Parallel connector	14	Serial connector
7	Monitor connector	15	PCI slots (In some models, other
			devices, such as a modem, might be
			installed here.)
8	USB connectors

Note: Some connectors on the rear of the computer are color-coded to help you to determine where to connect the cables on your computer.

8User Guide

Image 20

IBM 6824, 2289 manual Locating the connectors on the rear of your computer

Contents

User Guide Type 2289 Page User Guide Type 2289 Page Appendix B. Manual modem Iv User Guide Safety Information To connect To disconnect Connexion Déconnexion Lithium battery noticeModem safety information Laser compliance statement Consignes de sécurité relatives au modem Viii User Guide Overview Information resources User Guide Installing options Features Audio subsystem Security features Specifications Handling static-sensitive devices Available optionsTools required Installing external options Locating the connectors on the front of your computer Locating the connectors on the rear of your computer Connector Description Obtaining device drivers Removing the cover Locating components Identifying parts on the system board Installing memory What to do next Installing adapters Installing internal drives Drive specifications Installing a drive Connecting the first IDE CD-ROM drive or DVD-ROM drive Connecting an additional IDE CD-ROM drive or DVD-ROM drive Physical security Changing the battery Replacing the cover and connecting the cables Erasing a lost or forgotten password clearing Cmos Installing options User Guide Using the IBM Setup Utility program Starting the IBM Setup Utility programViewing and changing settings Exiting from the IBM Setup Utility program User password Administrator passwordSetting, changing, and deleting a password Using Security Profile by Device Changing the startup device sequence Selecting a startup deviceSelecting a temporary startup device User Guide Updating flashing Bios from a diskette Updating flashing Bios from your operating systemAppendix A. Updating System Programs System programs Recovering from a POST/BIOS update failure Appendix B. Manual modem commands Basic AT commands Extended AT commands Guard tone disabled Enable RTS/CTS hardware flow controlUS setting for off-hook-to-on-hook ratio Force DSR Signal High on Fax Class 2 commands MNP/V.42/V.42bis/V.44 commandsFax Class 1 commands Voice commands User Guide Appendix C. System address maps System memory mapAddress map Address range Address range hex Size Description Decimal LPT3 DMA I/O address map Address hex Description Bits Byte pointer Address hex Description Bits Byte pointer System resource DMA channel Data width System resource User Guide Appendix E. Notices Television output notice Trademarks IBM Index DVDPage Page Part Number 49P1040