55
“2E8/IRQ3”, and
“Disabled” for the on-board serial connector.
3.6.17
UART Mode Select
This
item allows you
to
select
UART mode. The choices:
“IrDA”,
“ASKIR”, and “Normal”.
3.6.18 RxD, TxD
Active
This item
allows
you to determine
the
active level
of the RxD
and TxD
serial lines. The Choices:
“Hi, Hi”, “Lo,
Lo”, “Lo, Hi”, and “Hi, Lo”.
3.6.19 IR Transmission
Delay
This item
allows
you to enable/disable
IR transmission delay.
The choices are “Enabled”
and
“Disabled”.
3.6.20
UR2 Duplex Mode
This item
allows
you to select the
IR
half/full duplex function.
The choices are “Half”
and
“Full”.
3.6.21
Use IR Pins
The choices
are
“RxD2, TxD2” and “IR-Rx2Tx2”.
Figure 3.9: Watch Dog Timer
3.6.22
Watch Dog Timer Select
Allow User select watch Dog time or disable..