54
“Disabled”.
3.6.9 USB 2.0
Controller
This entry is
to disable/enable
the USB 2.0 controller only. The
BIOS
itself
may/may not
have high-speed
USB support. If
the BIOS has
high speed USB
support built in, the
support will automatically turn
on when a high speed device
is attached.
The choices are “Enabled”
or “Disabled”.
3.6.10
USB Keyboard / Mouse Support
Select Enabled
if you
plan to use
an USB keyboard. The choices are
“Enabled” and “Disabled”.
3.6.11 AC97 Audio
Select
“Disable” if you do not
want to use AC-97 audio.
Options are
“Auto”, and “Disabled”.
3.6.12
Onboard LAN1 Control
Options are “Enabled”
and
“Disabled”. Select “Disabled”
if you
don’t want
to use
onboard LAN controller1.
3.6.13
Onboard LAN2 Control
Options are “Enabled” and “Disabled”.
Select
Disabled if you
don’t
want to use
the onboard LAN controller2.
Note: Correct sequence
of
onboard
Lan controllers(Lan1 & Lan2)
shows in the "Onboard
Device" BIOS view.
3.6.14
Capture Controller
Options are “Normal Mode” and “Enhanced Mode”. Select Enhanced
Mode if you want to have more effective video capture performance.
Default setting is Normal Mode.
Note:
DRAM default timings have
been carefully
cho-
sen and should ONLY
be changed
if
data is
being lost.
Please first contact
technical
sup-
port.
Super I/O Device:
3.6.15
Onboard Serial Port 1
The settings are “3F8/IRQ4”, “2F8/IRQ3”, “3E8/IRQ4”,
“2E8/IRQ3”, and
“Disabled” for the on-board serial connector.
3.6.16
Onboard Serial Port 2
The settings are “3F8/IRQ4”, “2F8/IRQ3”, “3E8/IRQ4”,