59
3.7.16 FDD, COM, LPT PORT When Enabled, the
system will resume
from suspend mode if
the
FDD, interface, COM
port, or
LPT port is
active. The
choices are
“Enabled” and “Disabled”.
When Enabled, the
system resumes
from suspend mode if
an
interrupt occurs.
The choices are “Enabled”
and
“Disabled”.
Use this
to set
up the system
after
power failure. The “Off” setting
keeps the system powered off after power failure, the
“On”
setting
boots
up
the system after failure, and
the “Former-Sts”
returns the
system
to the status before power
failure.