3.8 PnP/PCI Configurations

Figure 3.11: PnP/PCI configurations screen

3.8.1 Reset Configuration Data

The default is Disabled. Select Enabled to reset Extended System Config- uration Data (ESCD) if you have installed a new add-on card, and system configuration is in such a state that the OS cannot boot.

3.8.2 Resources Controlled By

The commands here are “Auto(ESCD)” or “Manual”. Choosing “Man- ual” requires you to choose resources from the following sub-menu. “Auto(ESCD)” automatically configures all of the boot and Plug and Play devices, but you must be using Windows 95 or above.

3.8.3PCI / VGA Palette Snoop

This is set to “Disabled” by default.

3.8.4Maximum Payload Size

This allows you to set the maximum TLP payload size for PCI Express devices. The options are [128 bytes], [256 bytes], [512 bytes], [1024 bytes], [2048 bytes], and [4096 bytes].

60

Page 60
Image 60
Advantech DVMB-554E PnP/PCI Configurations, Reset Configuration Data, Resources Controlled By, PCI / VGA Palette Snoop