Storage Manager.

3.6.5 On-Chip Serial ATA

Choose the status of serial ATA. The default setting is “Auto” which lets the system arrange all parallel and serial ATA resources automatically. The “Disabled” setting disables the SATA controller. The “Combined Mode” combines PATA and SATA, and maximum of 2 IDE drives in each channel. The “Enhanced Mode” enables both SATA and PATA, and a maximum of 6 IDE drives are supported. The “SATA Only” setting means SATA is operating in legacy mode.

3.6.6 PATA IDE Mode

This item shows the parallel ATA channel. It is Secondary.

3.6.7 SATA Port

The PATA IDE mode must to be set to Secondary and SATA will display

“P0, P2 is Primary". It means SATA0 and SATA2 act as Primary Chan- nel.We have one configuration with this setting by spec. and can’t swap the channel.

Figure 3.8: Onboard Device

3.6.8 USB Controller

Select Enabled if your system contains a Universal Serial Bus (USB) con- troller and you have USB peripherals. The choices are “Enabled” and

53

Page 53
Image 53
Advantech DVMB-554E user manual On-Chip Serial ATA, Pata IDE Mode, Sata Port, USB Controller