33
2.8.3 Reset Connector (CNX1-18)
Many computer cases offer the convenience
of a reset button. Connect the wire
from the reset button
2.8.4 HDD LED Connector (CNX1-19)
You can connect an LED to this connector
to
indicate when the HDD is active.
2.8.5 ATX Soft Power Switch (CNX1-21)
If your computer case is equipped with an ATX power supply,
you should
connect
the
power
on/off button on your computer case to this connector.
This
connection enables
you to turn your computer on and
off.
2.8.6 SM Bus Connector (CNX1-29)
This
connector is reserved
for
Advantech's SNMP-1000 HTTP/SNMP
Remote
System Manager.
The SNMP-1000 allows users
to monitor the
internal voltages, temperature and fans from a
remote
computer
through an
Ethernet network.
CN29
can be connected to CN19
of SNMP-1000.
Please be careful about the
pin
assignments, pin
1
must be connected to pin 1 and pin
2
to pin 2 on both
ends
of cable.