1.9 System Memory

The DVMB-554E has two sockets for 240-pin memory modules (SO- DIMMs). All these sockets use 1.8 V unbuffered double data rate synchronous DRAMs (DDR SDRAM). They are available in capacities of 256, 512 and 1024 MB. The sockets can be filled in any combination with DIMMs of any size, giving a total memory size between 256 MB and 2GB.

1.9.1 CPU FSB and memory speed

The DVMB-554E can accept DDR2 SDRAM memory chips without parity. Also note: The DVMB-554E accepts DDR2 400/533/667MHz SDRAM, and DDR2 SDRAM. The DVMB-554E does NOT support ECC (error checking and correction).

1.10 Memory Installation Procedures

To install DIMMs, first make sure the two handles of the DIMM socket are in the “open” position. i.e. The handles lean outward. Slowly slide the DIMM module along the plastic guides on both ends of the socket. Then press the DIMM module right down into the socket, until you hear a click. This is when the two handles have automatically locked the mem- ory module into the correct position of the DIMM socket. To remove the memory module, just push both handles outward, and the memory mod- ule will be ejected by the mechanism in the socket.

1.11 Cache Memory

The CPU that DVMB-554E supports built-in 2MB or 4MB cache memory.

25

Page 25
Image 25
Advantech DVMB-554E user manual System Memory, Memory Installation Procedures, Cache Memory, CPU FSB and memory speed