Advantech DVMB-554E Suspend Type, Modem Use IRQ, Suspend Mode, HDD Power Down, PowerOn by LAN

3.7.6 Suspend Type

The choices are “Stop Grant” and “PwrOn Suspend”.

3.7.7 Modem Use IRQ

This determines the IRQ that the MODEM can use.The choices are “3”, “4”, “5”, “7”, “9”, “10”, “11”, and “NA”.

3.7.8 Suspend Mode

This item allows user to determine the time of system inactivity, all devices except the CPU will be shut off.

3.7.9 HDD Power Down

This item allows user to determine the time of system inactivity, the hard disk drive will be powered down.

3.7.10 Soft-Off by PWR-BTTN

If you choose “Instant-Off”, then pushing the ATX soft power switch but- ton once will switch the system to “system off” power mode. You can choose “Delay 4 sec”. If you do, then pushing the button for more than 4 seconds will turn off the system, whereas pushing the button momentarily

(for less than 4 seconds) will switch the system to “suspend” mode.

3.7.11 PowerOn by LAN

This item allows you to power on the system by LAN. The choices are “Enabled” and “Disabled”.

3.7.12 CPU THRM-Throttling

This option controlls the CPU speed as a percentage of regular power. the choices are 87.5%, 75%, 62.5%, 50%, 37.5%, 25% .12% and 12.5%.

3.7.13 PowerOn by Modem

To enabled or disable the function to power on the system via a Modem connection from a remote host. The choice “Enabled” and “Disabled”.

3.7.14 PowerOn by Alarm

The choices are “Enabled” and “Disabled”. Fields that follow below indicate date of current month and time of alarm settings, if enabled.

3.7.15 Primary IDE 0 (1) and Secondary IDE 0 (1)

When Enabled, the system will resume from suspend mode if Primary IDE 0 (1) or Secondary IDE 0 (1) becomes active. The choices are “Enabled” and “Disabled”.

58