Diagnostic Error Code FRU/Action
170-195-XXX
VoltageSensor(s) Test aborted by user 1. Information
2. Re-start the test, if necessary
170-196-XXX
VoltageSensor(s) test halt, error threshold
exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
170-197-XXX
VoltageSensor(s) test warning 1. Make sure the component that is called
out is connected and/or enabled
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test
170-198-XXX
VoltageSensor(s) test aborted 1. If a component is called out, make sure
it is connected and/or enabled
2. Flash the system and re-test
3. Go to the ″Undetermined problems″
section
170-199-XXX
VoltageSensor(s) test failed, cause unknown 1. Go to the ″Undetermined problems″
section
2. Flash the system and re-test
3. Replace component under function test
170-250-XXX
170-251-XXX
VoltageSensor(s) Voltage limit error
1. Power supply
2. System board
170-254-XXX
VoltageSensor(s) Voltage Regulator Module
error
1. VoltageRegulator Module (VRM)
2. Microprocessor
3. System board
175-000-XXX
Thermal Sensor(s) TestPassed 1. No action
175-0XX-XXX
Thermal Sensor(s) failure 1. Flash system
2. System board
175-195-XXX
Thermal Sensor(s) Testaborted by user 1. Information
2. Re-start the test, if necessary
175-196-XXX
Thermal Sensor(s) test halt, error threshold
exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
175-197-XXX
Thermal Sensor(s) test warning 1. Make sure the component that is called
out is connected and/or enabled
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test
175-198-XXX
Thermal Sensor(s) test aborted 1. If a component is called out, make sure
it is connected and/or enabled
2. Flash the system and re-test
3. Go to ″Undetermined problems″section
Chapter6. Symptom-to-FRU Index 57