Connecting the Utility Cable

The multi-function connector (CN5) implements the following interfaces:

PC/AT compatible keyboard

PS/2 mouse port

Speaker port (0.1W output)

Hardware Reset input

Battery input for Real Time Clock

Soft Power Button input

To use these interfaces, you must connect to the utility port connector (CN5). The utility harness from the RTD cable kit provides a small speaker, two connectors for the keyboard and mouse, a push-button for resetting the PCI-104 system, a soft-power button, and a lithium battery to provide backup power for the real time clock.

Refer to Utility Port Connector (CN5) on page 28 to connect devices to the utility port connector.

Connecting a Keyboard

You may plug a PC/AT compatible keyboard directly into the PS/2 connector of the utility harness in the cable kit.

Note Many keyboards are switchable between PC/XT and AT operating modes, with the mode usually selected by a switch on the back or bottom of the keyboard. For correct operation with this cpuModule, you must select AT mode.

Connecting to the PC/104-Plus(PCI) Bus

Other PC/104-Plusor PCI-104 expansion boards may be connected to the cpuModule’s PC/104-Plus(PCI) bus connector. To connect expansion modules to the PC/104-Plusbus, follow the procedure below to ensure that stacking of the modules does not damage connectors or electronics.

WARNING Do not force the module onto the stack! Wiggling the module or applying too much pressure may damage it. If the module does not readily press into place, remove it, check for bent pins or out-of-place keying pins, and try again.

1.Turn off power to the PC/104-Plusor PCI-104 system or stack.

2.Select and install stand-offs to properly position the cpuModule on the stack.

3.Touch a grounded metal part of the rack to discharge any buildup of static electricity.

4.Remove the cpuModule from its anti-static bag.

5.Check that keying pins in the bus connector are properly positioned.

6.Check the stacking order; if a PCI to ISA bridge card is used to connect any PC/104 modules, make sure an XT bus card will not be placed between two AT bus cards or it will interrupt the AT bus signals.

7.Hold the cpuModule by its edges and orient it so the bus connector pins line up with the matching connector on the stack.

8.Gently and evenly press the cpuModule onto the PC/104-Plusor PCI-104 stack.

There are three additional considerations to make when using the PCI bus:

Slot selection switches on add-in boards

20 CMX158886 cpuModule

BDM-610000049 Rev G

Page 30
Image 30
IBM BDM-610000049 user manual Connecting the Utility Cable, Connecting a Keyboard, Connecting to the PC/104-PlusPCI Bus

BDM-610000049 specifications

The IBM BDM-610000049 is a powerful and versatile device designed for advanced data processing and analytics. This model is engineered to handle large volumes of data while ensuring high-speed performance and reliability. One of the main features of the BDM-610000049 is its robust processing capabilities, enabled by a state-of-the-art multi-core CPU architecture. This allows it to perform complex calculations and data manipulations efficiently, making it ideal for big data applications.

In terms of storage, the BDM-610000049 comes equipped with high-capacity SSD drives, which not only accelerate data access speeds but also enhance the overall system responsiveness. This feature is particularly beneficial for organizations that require rapid retrieval of stored information. The device also supports a variety of storage configurations, allowing users to tailor the system according to their specific needs, balancing between performance and capacity.

Networking technologies integrated into the BDM-610000049 are designed to facilitate seamless connectivity, ensuring quick and secure data transfers. Its advanced networking capabilities include support for multiple protocols, which streamline communication between different parts of the system and external devices. This is crucial for environments that rely on real-time data processing, such as financial services, healthcare, and logistics.

The IBM BDM-610000049 is also notable for its security features, which help protect sensitive data from unauthorized access and cyber threats. It incorporates state-of-the-art encryption protocols and secure access controls, providing an additional layer of safety for businesses handling critical information.

Moreover, the scalability of the BDM-610000049 is a key characteristic that sets it apart from competitors. Organizations can easily upgrade or expand their systems to accommodate growing data requirements without significant downtime or disruption. This flexibility is indispensable for businesses in today’s fast-paced digital landscape.

In summary, the IBM BDM-610000049 is a cutting-edge device that combines powerful processing, advanced storage technologies, robust networking capabilities, and enhanced security features. Its scalability ensures that it can grow with the demands of modern enterprises, making it a worthwhile investment for companies looking to harness the full power of their data. With the BDM-610000049, businesses can confidently pursue data-driven strategies, knowing they have a reliable and sophisticated technology solution at their disposal.