Memory Map | 59 |
I/O Address Map | 60 |
Hardware Interrupts | 61 |
multiPort: Advanced Digital I/O Ports (aDIO™) | 62 |
Digital I/O Register Set | 62 |
Port 1 Data register is a read/write byte direction | 64 |
Interrupts | 64 |
Advanced Digital Interrupts | 64 |
Event Mode | 64 |
Match Mode | 64 |
Strobe Mode | 65 |
65 | |
multiPort: Parallel Port Control | 66 |
multiPort: Floppy Drive | 66 |
AC’97 Audio | 66 |
Ethernet | 66 |
IDE Controller Configuration | 67 |
Cable Modes | 67 |
Cable Detection | 67 |
Device and Host Mode | 67 |
Host Determination of Cable Type | 67 |
Device Detect | 67 |
Legacy Mode and Native Mode IDE | 68 |
Legacy Mode | 68 |
Native Mode | 68 |
Configuring the ATA/IDE Disk Chip Socket | 68 |
Real Time Clock Control | 69 |
Overview | 69 |
Accessing the RTC Registers | 69 |
Watchdog Timer Control | 71 |
Thermal Management | 72 |
Thermal Monitor | 72 |
Fan Mode | 72 |
Further Temperature Reduction | 72 |
Power Management | 73 |
Enabling Enhanced Intel SpeedStep Technology (PX only) | 73 |
Advanced Configuration and Power Interface (ACPI) | 73 |
Power Button Modes | 73 |
73 | |
AT vs. ATX Power Supplies | 74 |
ATX Power Supply Signals | 74 |
Reducing Power Consumption | 75 |
76 | |
Reset Status Register | 77 |
DVMT Mode Select | 79 |
: vii |