IBM BDM-610000049 user manual CMX158886 before and after ATA/IDE Disk Chip Installation

Models: BDM-610000049

1 120
Download 120 pages 16.62 Kb
Page 46
Image 46
ATA/IDE Disk Chip

c.Save the settings in the BIOS setup

3.Remove power from the system.

WARNING The preceding steps should be performed before installing the Disk Chip in the ATA/IDE Disk Chip Socket. These steps ensure that the system is properly configured for the correct device and supply voltage, so neither the Disk Chip or cpuModule are damaged.

4.Insert the Disk Chip in the ATA/IDE Disk Chip Socket (U16) aligning pin 1 with the square solder pad on the board.

5.Apply power to the system.

6.Re-enter the BIOS and set the boot order of the system accordingly.

ATA/IDE Disk Chip

Pin 1 indicated by arrow

ATA/IDE Disk Chip Socket (U16)

Pin 1 indicated by arrow

Figure 5 CMX158886 before and after ATA/IDE Disk Chip Installation

36 CMX158886 cpuModule

BDM-610000049 Rev G

Page 46
Image 46
IBM BDM-610000049 CMX158886 before and after ATA/IDE Disk Chip Installation, ATA/IDE Disk Chip Pin 1 indicated by arrow