IBM BDM-610000049 user manual Revision History, CMX158886 cpuModules User’s Manual

Models: BDM-610000049

1 120
Download 120 pages 16.62 Kb
Page 2
Image 2
CMX158886 cpuModules™ User’s Manual

CMX158886 cpuModules™ User’s Manual

RTD Document Number: BDM-610000049 Revision G

Copyright © 2008 RTD Embedded Technologies, Inc. All rights reserved.

Trademarks

Advanced Digital I/O, aDIO, a2DIO, Autonomous SmartCal, cpuModule, dspFramework, dspModule, IDAN, HiDAN, HiDANplus, “MIL Value for COTS prices”, multiPort, and PC/104EZ are trademarks, and “Accessing the Analog World”, dataModule, RTD, and the RTD logo are registered trademarks of RTD Embedded Technologies, Inc. PS/2, PC/XT, PC/AT, and IBM are trademarks of International Business Machines Inc. MS-DOS, Windows, Windows 95, Windows 98, and Windows NT are trademarks of Microsoft Corporation. Linux is a registered trademark of Linus Torvalds. ROM-DOS is a trademark of Datalight, Inc. Intel is a registered trademark of Intel Corporation. PC/104 is a registered trademark of PC/104 Consortium. All other trademarks appearing in this document are the property of their respective owners.

Contents and specifications within this manual are subject to change without notice.

Revision History

Revision

Date

Reason for Change

 

 

 

A

12/13/06

Initial release

B07/26/06 Added section to Chapter 3 with instructions for installing an ATA/IDE Disk Chip Removed the “Preliminary” tag on the cover sheet

Added section describing proper grounding techniques

C10/02/06 Added block diagrams to Appendix C to show the dimensions and connectors of the IDAN CMX158886 that includes a PCI to ISA bridge board

Added “Network Boot” bullet to list of board features Removed references to 1.1 GHz Pentium M processor

D11/29/06 Described +3.3 V source for FP_VCC, and added footnote for DDC signals (see Table 13 on page 33) Added section to Chapter 4: DVMT Mode Select—page 79

Removed table describing solder jumpers (see footnote of Table 62 on page 87) Added height of Mini Fan Heatsink (see Physical Dimensions on page 89)

Made correction to IDAN SVGA connector pinout table (see Table 71 on page 101) Added dimension of heatsink fins on IDAN frames (see page 96 and page 104)

E2/23/07 Removed Thermal Throttling. Corrected multiPort Floppy setup. Removed EEPROM section. Updated board name.

F1/9/08 Added 1024 MB versions. Combined PX and CX manuals. Added support for dual serial ports. Corrected storage temperatures.

G5/21/08 Corrected Table 26, COM A (RS-422/485) and COM B (RS-422/485)—41Added User EEPROM on page 80

Corrected aDIO Connector in Figure 10, IDAN-CMX158886-BRG Connectors —104Added information for ECC verison.

ii CMX158886 cpuModule

BDM-610000049 Rev G

Page 2
Image 2
IBM BDM-610000049 user manual Revision History, CMX158886 cpuModules User’s Manual