IBM FTP Adapter Trace -T or -TRACE, FTP Commands, List of Commands, TRACE+SV fullpath, Option

Chapter 3 - FTP Commands List of Commands

Trace (-T or -TRACE)

Use the Trace adapter command (-Tor -TRACE) to produce a diagnostics file with

the default name m4ftp.mtr in the map directory where the adapter is installed. The file records trace information detailing the FTP adapter activity.

-TRACE[+][SV] [full_path]

Option	Description
+	Append trace information to the existing log file.
S	Summary mode. Record only minimal information only
	in the log file. This is the default value.
V	Verbose mode. Record in the log file all activity
	occurring while the adapter is retrieving data. If not
	specified, summary mode assumed.
full_path	Create trace file with the specified name in the
	specified directory. By default, the directory is where
	the map is located and the file name is m4ftp.mtr.

Note Because summary mode is the default, using -TRACESprovides the same output

as –TRACE.

F T P A d a p t e r R e f e r e n c e G u i d e

2 8