IBM P260 Using the CONVERGENCE On- screen Display

Using the CONVERGENCE On- screen Display

The CONVERGENCE settings allow you to adjust the quality of the picture by controlling the convergence. The convergence refers to the alignment of the red, green, and blue color signals.

If you see red or blue shadows around letters or lines, adjust the convergence.

Once the setting is adjusted, it will be stored in memory for all input signals received.

1Press the button.

The MENU OSD appears.

2Press the ./>buttons to select “ CONVERGENCE” and press the button again.

The CONVERGENCE OSD appears.

CONVERGENCE

TOP

BOT 2 6

3Press the ./>buttons to select the item you want to adjust.

Select		To
		adjust the horizontal convergence
(Horizontal Convergence)
		adjust the vertical convergence
(Vertical Convergence)
	TOP	adjust the vertical convergence at the
V CONVER TOP		top of the screen
	BOT	adjust the vertical convergence at the
V CONVER BOTTOM		bottom of the screen

Customizing Your Monitor

4Press the ?//buttons to adjust the settings.

For	Press
	/. . . to shift red shadows to the right
(Horizontal Convergence)	and blue shadows to the left

?. . . to shift red shadows to the left and blue shadows to the right

	/. . . to shift red shadows up and blue
(Vertical Convergence)	shadows down

?. . . to shift red shadows down and blue shadows up

	TOP	/. . . to shift red shadows up and
V CONVER TOP		blue shadows down at the top of
		the screen

?. . . to shift red shadows down and blue shadows up at the top of

		the screen	EN
	BOT	/. . . to shift red shadows up and blue
V CONVER BOTTOM		shadows down at the bottom of
		the screen

?. . . to shift red shadows down and blue shadows up at the bottom of the screen

Press the button once to return to the MENU OSD, and twice to return to normal viewing. If no buttons are pressed, the OSD closes automatically after about 30 seconds.

To reset, press the ?(reset) button while the OSD is on. The selected item is reset to the factory setting.

9