Customizing Your Monitor
Changing the
You can change the OSD position (for example, when you want to adjust the picture behind the OSD).
1Press the 
button.
The MENU OSD appears.
2Press the ./>buttons to select “
OPTION” and press the 
button again.
The OPTION OSD appears.
OPT I ON
DEGAUSS
ON
3Press the ./>buttons to select “
(OSD H
POSITION)” or “
(OSD V POSITION).”
Select “
(OSD H POSITION)” to adjust the horizontal position.
OPT I ON
OSD H
POS I T I ON
2 6
Locking the controls
You can protect adjustment data by locking the controls.
1Press the 
button.
The MENU OSD appears.
2Press the ./>buttons to select “
OPTION” and press the 
button again.
The OPTION OSD appears.
OPT I ON
DEGAUSS
ON
3Press the ./>buttons to select “
(CONTROL
LOCK).”
OPT I ON
CONTROL
LOCK
• OFF • ON
4Press the /button to select “ON.”
Select “
(OSD V POSITION)” to adjust the vertical position.
OPT I ON
OSD V
POS I T I ON
2 6
4Press the ?// buttons to move the OSD to the desired position.
Press the 
button once to return to the MENU OSD, and twice to return to normal viewing. If no buttons are pressed, the OSD closes automatically after about 30 seconds.
To reset, press the ?(reset) button while the OSD is on.
Press the 
button once to return to the MENU OSD, and twice to return to normal viewing. If no buttons are pressed, the OSD closes automatically after about 30 seconds.
Only the u(power) switch, EXIT, and “
(CONTROL LOCK)” of the “
OPTION” OSD will operate. If any other
items are selected, the 
mark appears on the screen.
To cancel the control lock
Repeat steps 1 through 3 above and press the ?button to select “OFF.”
14