Customizing Your Monitor

 

Technical Features

 

 

 

 

 

 

 

 

 

 

 

 

Resetting the Adjustments

Resetting an adjustment item

1Press the and ./>buttons to select the OSD containing the item you want to reset, and press the button again.

2Press the ./>buttons to select the item you want to reset.

Damper Wires

When viewing a white background, very thin horizontal lines may be visible on the screen as shown below. These lines are the shadows of the damper wires and are characteristic of CRTs that use aperture grilles. The wires are attached to the aperture grille on the inside of the Trinitron tube and prevent the vibration of the aperture grille.

Damper wires

3Press the ? (reset) button.

Resetting all of the adjustment data for

the current input signal

When there is no OSD displayed, press the ? (reset) button.

All of the adjustment data for the current input signal is reset to the factory settings.

Note that the following items are not reset to the factory settings.

•OSD language

•adjustment mode in the COLOR OSD (EASY, EXPERT, sRGB)

•OSD position

•control lock function

Plug & Play

This monitor complies with the DDC1, DDC2B and DDC2Bi Display Data Channel (DDC) standards of VESA.

When a DDC1 host system is connected, the monitor EN synchronizes with the V. CLK in accordance with the VESA standards and outputs the EDID (Extended Display Identification Data) to the data line.

When a DDC2B or DDC2Bi host system is connected, the monitor automatically switches to the appropriate standard.

Resetting all of the adjustment data for all

input signals

Press and hold the ? (reset) button for more than two seconds.

All of the adjustment data, including the brightness and contrast, is reset to the factory settings.

Note

The ?(reset) button does not function when

(CONTROL

15

LOCK) is set to ON.