Customizing Your Monitor

Changing the on-screen display position

Locking the controls

You can change the OSD position (for example, when you want to adjust the picture behind the OSD).

1 Press the

button.

The MENU OSD appears.

2Press the ¬./>and >?//buttons to select “

OPTION,” and press the button again.

The OPTION OSD appears.

OPTION

ON

MANUAL DEGAUSS

3Press the ¬./>buttons to select “ (OSD H

POSITION)” or “ (OSD V POSITION).”

Select “ (OSD H POSITION)” to adjust the horizontal position.

OPTION

OSD H POSITION

Select “ (OSD V POSITION)” to adjust the vertical position.

OPTION

OSD V POSITION

4Press the >?//buttons to move the OSD to the desired position.

The OPTION OSD automatically disappears after about 30 seconds.

To close the OSD, press the button again.

To reset, press the ? (reset) button while the OSD is on.

The control lock function disables all of the buttons on the front panel except the u (power) switch and button.

1 Press the button. The MENU OSD appears.

2Press the ¬./>and >?//buttons to select “

OPTION,” and press the button again.

The OPTION OSD appears.

OPTION

ON

MANUAL DEGAUSS

3Press the ¬./>buttons to select “ (CONTROL

LOCK).”

OPTION

OFF ON

CONTROL LOCK

4Press the >?//buttons to select “ON.”

The OPTION OSD automatically disappears after about 30 seconds.

To close the OSD, press the button again.

Once you select “ON,” you cannot select any items except “EXIT” and “ OPTION” in the MENU OSD.

If you press any button other than the u (power) switch and

button, the mark appears on the screen.

To cancel the control lock

Repeat steps 1 through 3 above and press the >?// buttons to select “OFF.”

EN

F

ES

C

11

Page 17
Image 17
IBM P72 Changing the on-screen display position, Press the ¬./buttons to select Control, Press the ?//buttons to select on