Customizing Your Monitor
Using the SIZE On-screen Display
The SIZE settings allow you to adjust the size of the picture. Once the setting is adjusted, it will be stored in memory for the current input signal.
1 Press the | button. |
The MENU OSD appears.
2Press the ¬./>and >?//buttons to select “ 
SIZE,” and press the 
button again.
The SIZE OSD appears.
SIZE
73
26
3For horizontal adjustment
Press the >?//buttons.
/. . . to increase picture width
?. . . to decrease picture width
For vertical adjustment
Press the ¬./>buttons.
>. . . to increase picture height
.. . . to decrease picture height
The OSD automatically disappears after about 30 seconds. To close the OSD, press the 
button again.
To reset, press the ? (reset) button while the OSD is on. The horizontal and vertical sizes are both reset to the factory settings.
Using the GEOM (Geometry) On- screen Display
The GEOM (geometry) settings allow you to adjust the shape and orientation of the picture.
Once the rotation is adjusted, it will be stored in memory for all input signals received. All other adjustments will be stored in memory for the current input signal.
1 Press the | button. |
The MENU OSD appears.
2Press the ¬./>and >?//buttons to select “ 
GEOM,” and press the 
button again.
The GEOMETRY OSD appears.
GEOMETRY
26
ROTATION
3Press the ¬./>buttons to select the item you want to adjust.
Select | To |
ROTATION | adjust the picture rotation |
PINCUSHION | adjust the picture sides |
PIN BALANCE | adjust the picture side balance |
KEYSTONE | adjust the picture width |
KEY BALANCE | adjust the picture shape balance |
6
