IBM PC 300GL manual System software, Bios, Plug and Play, Post, LSA 2.0 support

Models: PC 300GL

1 69
Download 69 pages 38.42 Kb
Page 36
Image 36
Chapter 5. System software

Chapter 5. System software

This section briefly describes some of the system software included with your computer.

BIOS

Your personal computer uses the IBM basic input/output system (BIOS), which is stored in flash electrically erasable programmable read-only memory (EEPROM). Some features of the BIOS are:

PCI support according to PCI BIOS Specification 2.2

Microsoft PCI IRQ Routing Table

Plug and Play support according to Plug and Play BIOS Specification 1.1a

Advanced Power Management (APM) support according to APM BIOS Interface Specification 1.2

Wake on LAN support

Wake on Ring support

Remote Initial Program Load (RIPL) and Dynamic Host Configuration Protocol (DHCP)

Flash-over-LAN support

Alternate startup sequence

IBM Look and Feel - such as screen arrangements and user interface

ACPI (Advanced Configuration and Power Interface)

IDE Logical Block Addressing (LBA)

LSA 2.0 support

Digital optical disk support

LS-120 disk drive support

DM BIOS 2.1 (DMI 2.0 compliant)

PC99 compliance

Plug and Play

Support for Plug and Play conforms to the following:

Plug and Play BIOS Specification 1.1a and 1.0

Plug and Play BIOS Extension Design Guide

Plug and PLay BIOS Specification, Errata, and Clarifications 1.0

Guide to Integrating the Plug and Play BIOS Extensions with system BIOS 1.2

Plug and Play Kit for DOS and Windows

POST

IBM power-on self-test (POST) code is used. Also, initialization code is included for the on-board system devices and controllers.

POST error codes include text messages for determining the cause of an error. For more information, see “Appendix D. Error codes,” on page 55 and your PC 300GL and PC 300PL User Guide.

© Copyright IBM Corp. 2000

29

Page 36
Image 36
IBM PC 300GL System software, Bios, Plug and Play, Post, PCI support according to PCI BIOS Specification, LSA 2.0 support