IBM PROJECTOR C400 manual Setup menu

The following table shows the options that you will see in the Options menu and the default.

Item	Description	Default
Blank Screen	Press the cursor left/right button	Blue
	to select a background color for
	blank screen.
	Range:
	Black/Red/Green/Blue/White
Auto Source	Press the cursor left/right button	On
	to enable or disable automatic
	source detection.
	Range: On/Off
Auto Power Off	Press the cursor left/right button	Off
	to disable automatic shutdown of
	lamp after 10 minutes of
	inactivity.
	Range: On/Off
Volume	Press the cursor left/button to	4
	adjust the audio volume.
	Range: 0 - 8
Menu Position	Press the cursor left/right button	Center
	to position the OSD on screen.
	Range:
	Left/Right/Center/Down/Up
Menu Display	Press the cursor left/right button	15 seconds
	to determine timeout delay of
	OSD.
	Range: 10-30 seconds
Translucent Menu	Press the cursor up/down button	Off
	to set menu screen translucency.
	Range: On/Off
Cancel	Resets Auto Power-Off, Volume,	Not applicable
	Menu Position, Menu Display,
	and Translucent Menu to default
	values.

Setup menu

To access the View menu, follow the steps below:

1.Press the Menu button to open the main menu.

2.Press the left/right cursor to move to the Setup menu.

3.Press the cursor up/down button to move up and down in the Setup menu. The Setup menu with a single input and the Setup menu with a dual input are shown below.

Chapter 5. On-Screen Display menu controls 5-5