IBM PROJECTOR C400 manual Information menu, Agc

Item	Description	Default
Video automatic gain control	Press the cursor right/left button	On
(AGC)	to enable or disable AGC for
	video source.
	Range: On/Off
Projection	Press the cursor left/right button	Desktop mount,
	to select from four projection	front of screen
	methods.
	Range: Desktop mount, front of
	screen/Desktop mount, rear of
	screen/Ceiling mount, front of
	screen/Ceiling mount, rear of
	screen
Frequency	Press the cursor left/right button	Auto detected
	to adjust the A/D sampling
	clock.
	Range: 0-100
Tracking	Press the cursor left/right button	Auto detected
	to adjust the A/D sampling
	number.
	Range: 0-100
Pip Size	Press the cursor left/right button	Off
	to adjust the secondary image
	size.
	Note: Pip Size is only available
	when the projector is connected
	to dual input sources.
	Range:
	Off/Small/Medium/Large
Pip Position	Press the cursor left/right button	Upper Left
	to adjust the secondary image
	location.
	Note: Pip Position is only
	available when the projector is
	connected to dual input sources.
	Range: Upper left to lower right
Pip Input	Press the cursor left/right button	Auto
	to adjust the secondary image
	source.
	Note: Pip Input is only available
	when the projector is connected
	to dual input sources.
	Range: Auto/Video/S-video
Cancel	Resets Video Type, Video AGC,	N/A
	and Projection to default values.

Information menu

To access the Information menu, follow the steps below:

1.Press the Menu button to open the main menu.

Chapter 5. On-Screen Display menu controls 5-7