IBM SC41-5420-04 manual TCP/IP Jobs

Using the Start TCP/IP Server (STRTCPSVR) command starts the servers
individually or together. You can monitor the jobs with option 20 (Work with
TCP/IP jobs in QSYSWRK subsystem) from the TCP/IP Administration menu.
If you want TCP/IP processing and any related TCP/IP servers to start
automatically at the initial program load (IPL), add STRTCP to the QSTRUP CL
program.
Note: If they are installed, the Client Access host servers are automatically started
when TCP/IP is started.
Changing the IPL Start-Up Program The autostart job in the controlling subsystem
transfers control to the program specified in the system value QSTRUPPGM. You
can tailor this program. For instructions on how to create your own IPL start-up
program, see Work Management
(http://publib.boulder.ibm.com/pubs/html/as400/v5r1/ic2924/info/rzaks/rzaks1.htm)
in the Information Center. If you are using the Supplemental Manuals CD, then
switch to the iSeries Information Center CD to access this information.
REMINDER: Host Table Conversion: If you had a pre-V3R1M0 version of TCP/IP
installed on your iSeries and you had a local host table with more than 75 entries,
use one of the host table configuration commands, such as CHGTCPHTE or
MRGTCPHT before you run the STRTCP command. Using the host table
configuration commands converts pre-V3R1M0 host tables to the new format
without affecting the performance of the STRTCP command processing.
TCP/IP Jobs
Jobs started by the Start TCP/IP (STRTCP) command are listed in Table 3.
Table 3. Jobs Used by TCP/IP
Job Name	Description
QAPPCTCP	APPC over TCP/IP applications
QTBOOTP	BOOTP server
QTCPIP	Main TCP/IP job
QTFTPxxxxx	FTP server (there may be several)
QTGTELNETS	TELNET server (there may be several)
QTRTDxxxxx	RouteD server
QTRXCxxxx	REXEC server (there may be several)
QTSMTPCLNT	SMTP client
QTSMTPSRVR	SMTP server
QTSMTPBRCL	SMTP bridge client
QTSMTPBRSR	SMTP bridge server
QTTFTxxxxx	TFTP server (there may be several)
QTMSNMP	SNMP server
QTMSNMPRCV	SNMP server
QSNMPSA	SNMP server
QTLPDxxxxx	LPD server (there may be several)
QTPOxxxxxx	POP server (there may be several)
QTPPANSxxx	Dial-in (*ANS) support (PPP)
QTPPDIALxx	Dial-out (*DIAL) support (PPP)

Chapter 1. Configuring TCP/IP 25