Work with TCP/IP Remote System Information

System: SYSNAM890

Type options, press Enter. 1=Add 4=Remove 5=Display

 

Internet

Network

 

Reverse

Opt

Address

Address

PVC

Charges

________________

(No remote system information)

Figure 9. Work with Remote System (X.25) Information

Type option 1 (Add) at the input-capable top list entry to go to the Add TCP/IP Remote System (ADDTCPRSI) display, as shown in Figure 10.

Add TCP/IP Remote System (ADDTCPRSI)

Type choices, press Enter.

 

 

Internet address . . . . . . . . > '9.4.73.66'

 

Network address . . . . . . . . > 40030002

 

PVC logical channel identifier

 

001-FFF

X.25 reverse charge

*NONE

*NONE, *REQUEST, *ACCEPT

 

Additional Parameters

 

Default packet size:

 

 

 

Transmit packet size

*LIND

*LIND, 64, 128, 256, 512...

Receive packet size

*LIND

*LIND, *TRANSMIT, 64, 128...

Default window size:

 

 

 

Transmit window size

*LIND

1-15, *LIND

Receive window size

*LIND

1-15, *LIND, *TRANSMIT

 

 

 

Bottom

F3=Exit F4=Prompt

F5=Refresh

F12=Cancel

F13=How to use this display

F24=More keys

 

 

 

Figure 10. Add Remote System (X.25) Information

The network controller used by iSeries TCP/IP does not allow you to specify X.25 user facilities. However, some of the values usually configured on a controller, using the ADDTCPRSI command, allow you to configure each X.25 remote system. These values include reverse charging, packet sizes, and window sizes.

Use the following CL command to enter the information as shown in the display above:

ADDTCPRSI INTNETADR('9.4.73.66')

NETADR(40030002)

Notes:

1.Specifying remote system information for an X.25 DDN interface causes that information to be used instead of the DDN conversion algorithm. The DDN conversion algorithm is used only for a connection with DDN specified as *YES when you try to connect to a host that is not defined in the remote system

Chapter 1. Configuring TCP/IP 17

Page 31
Image 31
IBM SC41-5420-04 manual Pvc, None NONE, *REQUEST, *ACCEPT, Lind 15, *LIND, *TRANSMIT