|
| Work with Exit Programs | |
Exit point: | QIBM_QTMT_WSG | Format: QAPP0100 | |
Type options, press Enter. |
| ||
1=Add 4=Remove | 5=Display | 10=Replace | |
| Exit |
|
|
| Program | Exit |
|
Opt | Number | Program | Library |
(No exit programs found.)
Figure 65. Adding an Exit Program — Display 1
Step 2: Select the Add Exit Program option
Select the add option by typing a 1 (Add) in the Opt column as shown in Figure 66.
|
| Work with Exit Programs | |
Exit point: QIBM_QTMT_WSG | Format: QAPP0100 | ||
Type options, press Enter. |
| ||
1=Add | 4=Remove | 5=Display | 10=Replace |
| Exit |
|
|
| Program | Exit |
|
Opt | Number | Program | Library |
1 |
|
|
|
(No exit programs found.)
Figure 66. Adding an Exit Program — Display 2
Step 3: Add your exit program
Fill in the exit program information as shown in Figure 67 on page 84 and Figure 68 on page 84, then press enter.
Notes:
1.You can bypass Steps 1 and 2 by using the Add Exit Program (ADDEXITPGM) command.
2.You must set the Program number parameter of the Add Exit Program (ADDEXITPGM) command to 1 when adding exit programs to FTP exit points.
3.When you add exit programs for FTP clients, these programs take effect as soon as you start additional sessions. Changes do not affect client sessions that are already running.
4.When you add FTP server exit programs, end and restart the FTP servers to ensure that all servers are using the exit programs.
Appendix B. TCP/IP Application Exit Points and Programs 83
