When you add workstation gateway server exit programs, you do not need to end and restart the workstation gateway server. The WSG server checks for the exit program dynamically.
When you add REXEC server exit programs, you do not need to end and restart the REXEC server. The REXEC server checks for the exit programs dynamically.
| Add Exit Program (ADDEXITPGM) | ||
Type choices, press Enter. |
|
| |
Exit point | . . . . > QIBM_QTMT_WSG |
| |
Exit point format . . . | . . . . > QAPP0100 | Name | |
Program number | . . . . > 1 | ||
Program | . . . . > YOURPGM | Name | |
Library | . . . . > | YOURLIB | Name, *CURLIB |
Text 'description' . . . | . . . . > 'Description of your exit program' | ||
| Additional Parameters |
| |
Replace existing entry . | . . . . > *NO | *YES, *NO | |
Create exit point . . . | . . . . | *NO | *YES, *NO |
More...
F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display
F24=More keys
Figure 67. Adding an Exit Program — Display 3
Add Exit Program (ADDEXITPGM)
Type choices, press Enter. |
|
Exit program data: |
|
Coded character set ID . . . . *JOB | Number, *NONE, *JOB |
Length of data | |
Program data |
|
... |
|
Figure 68. Adding an Exit Program — Display 4
Removing Exit Programs
To remove an exit program from an exit point, do one of the following:
vFollow the steps for adding an exit point until the Work with Exit Programs display is shown. Select option 4 (Remove) to remove the exit program.
vUse the Remove Exit Program (RMVEXITPGM) command.
When you remove an exit program that performs a
84OS/400 TCP/IP Configuration and Reference V5R1