Appendix A. Configuring a Physical Line for TCP/IP Communication
On the iSeries 400, communication occurs through objects called lines, controllers, and devices. The communications objects for iSeries TCP/IP are the line descriptions, the network controller descriptions, and the network device descriptions.
TCP/IP communicates over a variety of physical line types and network interfaces (NWI). The command that defines the characteristics of the physical line connection or network interface depends on the type of communications adapter, as shown in Table 8.
Table 8. Line Types and Network Interfaces Supported by TCP/IP
Line type | Configuration command |
|
|
|
|
Asynchronous | Create Line Description (Async) (CRTLINASC) See Link | |
| Configuration | |
| (http://publib.boulder.ibm.com/pubs/html/as400/v5r1/ic2924/info/ | |
| rzaiy/rzaiylinkline.htm) in the Information Center. If you are using | |
| the Supplemental Manuals CD, then switch to the iSeries | |
| Information Center CD to access this information. | |
|
|
|
DDI | Create Line Description (DDI Network) (CRTLINDDI) | |
|
|
|
Ethernet | Create Line Description (Ethernet) (CRTLINETH) | |
|
|
|
Frame relay | Create Line Description (Frame Relay Network) (CRTLINFR) | |
|
|
|
Frame relay NWI | The frame relay NWI is created using the Create Network Interface | |
using a frame relay, | Frame Relay Network (CRTNWIFR) command. | |
token ring, Ethernet, | The line description is created using the appropriate Create Line | |
or DDI line | ||
description | Description command and attached to the frame relay NWI by | |
| specifying the NWI and NWIDLCI parameters. | |
|
|
|
ISDN NWI using an | The ISDN NWI is created using the Create Network Interface ISDN | |
X.25 line description | (CRTNWIISDN) command. | |
| The X.25 line is created using the Create Line X.25 (CRTLINX25) | |
| command and attached to the ISDN NWI by specifying the NWI, | |
| NWICHLTYPE, NWICHLNBR, and SWTNWILST parameters. | |
|
|
|
Create Line Description (PPP) (CRTLINPPP) See Link Configuration | ||
| (http://publib.boulder.ibm.com/pubs/html/as400/v5r1/ic2924/info/ | |
| rzaiy/rzaiylinkline.htm) in the Information Center. If you are using | |
| the Supplemental Manuals CD, then switch to the iSeries | |
| Information Center CD to access this information. | |
|
|
|
Create Line Description | ||
|
|
|
Twinax | Create Line Description (TDLC) (CRTLINTDLC) | |
|
|
|
Wireless | Create Line Description (Wireless Network) (CRTLINWLS) | |
|
|
|
X.25 | Create Line Description (X.25) (CRTLINX25) | |
|
|
|
You can describe the characteristics of the communications controllers by using the Create Controller Description (Network) (CRTCTLNET) command or by letting the system create the controller automatically when you activate TCP/IP. You only need one network controller to describe all the systems with which you communicate over any given line description.
© Copyright IBM Corp. 1997, 2001 | 75 |