3.
If any exception is encountered when calling the exit program, the REXEC server will not allow the operation and the message ″Exception encountered for REXEC exit program &1 in library &2 for exit point &3.″ is issued to the job log.
The following note applies to the TFTP server (application identifier 3):
1.For the TFTP server program, operation identifier 6 indicates the TFTP Read Request (RRQ) operation; operation code 7 indicates the TFTP Write Request (WRQ) operation.
Remote Execution Server Command Processing Selection Exit | |||||
Point |
|
|
| ||
| The REXEC server command processing selection exit program enables you to | ||||
| select: |
|
|
| |
| v Which command processor runs the command that the REXEC client user | ||||
| provides |
|
| ||
| v Whether the REXEC server converts data between ASCII and EBCDIC (for | ||||
| Qshell commands or spawn path names) |
| |||
| Required Parameter Group: |
|
| ||
|
|
|
|
| |
| 1 | User profile | Input | Char(10) | |
| |||||
| 2 | Remote IP address | Input | Char(*) | |
| 3 | Length of remote IP address | Input | Binary(4) | |
| 4 | Command string | Input | Char(*) | |
| 5 | Length of command string | Input | Binary(4) | |
| 6 | Command processor identifier | Output | Binary(4) | |
| 7 | Character conversion option | Output | Binary(4) | |
|
|
|
|
| |
| Exit Point Name: QIBM_QTMF_SVR_SELECT |
| |||
|
| ||||
| Exit Point Format Name: RXCS0100 |
|
| ||
| Note: Character data passes to the exit program in the coded character set | ||||
| identifier (CCSID) of the job. If the job CCSID is 65535, the server uses the | ||||
| default CCSID of the job. |
|
| ||
| Required Parameter Group |
|
| ||
| User profile |
|
| ||
| INPUT; CHAR(10) The user profile under which the requested operation is | ||||
| run. |
|
|
| |
| Remote IP address |
|
| ||
| INPUT; CHAR(*) The Internet Protocol (IP) address of the REXEC client | ||||
| system. This string is in dotted decimal format, left justified. | ||||
| Length of remote IP address |
|
| ||
| INPUT; BINARY(4) Indicates the length (in bytes) of the remote IP address. | ||||
| Command string |
|
| ||
| INPUT; CHAR(*) The command to be run as specified by the REXEC client. | ||||
| Length of command string |
|
| ||
| INPUT; BINARY(4) Indicates the length (in bytes) of the command string. |
Appendix B. TCP/IP Application Exit Points and Programs 89