Work with TCP/IP Network Status
System: SYSNAM04
Select one of the following:
1.Work with TCP/IP interface status
2.Display TCP/IP route information
3.Work with TCP/IP connection status
Figure 24. Work with TCP/IP Network Status
Work with TCP/IP Interface Status
The Work with TCP/IP Interface Status display, as shown in Figure 25, provides the most current summary of interface activity. This display allows you to view TCP/IP interface information for selected interfaces and to start or end TCP/IP interfaces. To view the Work with TCP/IP Interface Status display, take these steps:
1.Type 1 on the command line of the Work with TCP/IP Network Status menu or enter the WRKTCPSTS *IFC command.
2.Press the Enter key.
Work with TCP/IP Interface Status
System: SYSNAM04
Type options, press Enter.
5=Display details 8=Display associated routes 9=Start 10=End 12=Work with configuration status
Internet | Network | Line | Interface |
Opt Address | Address | Description | Status |
9.125.87.10 | 9.125.87.0 | TRNLINE | Active |
9.125.87.222 | 9.125.87.0 | TESTTRN | Active |
127.0.0.1 | 127.0.0.0 | *LOOPBACK | Active |
|
| Bottom |
F3=Exit | F4=Prompt | F5=Refresh F11=Display line information F12=Cancel |
F13=Sort by column | F24=More keys | |
Figure 25. Work with TCP/IP Interface Status, Display 1 of 2
Press F11 to change the contents of the display to include the subnet mask, type of service, maximum transmission unit (MTU), and line type, as shown in Figure 26 on page 35.
34OS/400 TCP/IP Configuration and Reference V5R1
