IBM THINKPAD 385XD (2635) manual Fn +F12

Notes:
1. To disable suspend	mode, set the mode t
not suspend even if LCD is closed.” in th
ThinkPad Configration	program.

2.If the computer is being powered by a and a communication PC Card is being used, computer entersstandby modeinstead of

entering the normalsuspend mode, and the						PC
Card	and application			programs	remain	active.
3. The	computer	will	not	enter	suspend	mode w
a communication		link	is	active.

The following events cause the computer to retu suspend mode to normal operation:

Ÿ	The	LCD	is		opened.
Ÿ	The	real		time clock alarm is signaled.
Ÿ	The	ring		indicator (RI) is signaled by a
	or a		PC	Card		device.
Ÿ	The Fn		key		is	pressed.

ŸAn external keyboard key is pressed while computer is operating with ac power.

The computer exits suspend mode and enters hib mode when a preset timer condition is satisfie

Hibernation Mode:In hibernation mode, the following occurs:

ŸThe system status, RAM, VRAM, and setup data

stored on the hard disk.

ŸThe computer is powered off.

Notes:

The computer cannot enter hibernation mode if being powered by ac power and a communicatio Card is used.

The following events cause the computer to ente hibernation mode:

Ÿ	Hibernation	mode	is requestedFn keyby	the
	(Fn +F12 ).
Ÿ	Timer conditions		are satisfied in suspend mod
Ÿ	A critically	low	battery condition	occurs.

ŸThe PS2 HIBernation command is set in the ThinkPad Configration program.

The computer exits hibernation mode and resumes operation when the power-on switch is pressed. power is turned on, the hibernation file in the on the hard disk drive is read and system st restored from the hard disk drive.

36 IBM ThinkPad 380XD, 385XD