![](/images/new-backgrounds/1174406/174406153x1.webp)
For some models, you need to apply two FCC labels. Check the old base cover; if it has two FCC labels, apply both to the new base cover.
2010 LCD unit
For access, remove these FRUs in order:
•“1010 Battery pack” on page 50
•“1020 Bottom slot cover” on page 51
•“1040 Hard disk drive or solid state drive assembly” on page 53
•“1070 Keyboard” on page 57
•“1090 Top case assembly” on page 60
•“1130 System board assembly, fan assembly, and backup battery” on page 65
Table 27. Removal steps of LCD unit
In step
1 , release the antenna cables from the cable guides.
|
| 1 |
| 1 |
|
1 |
|
|
1 | 1 | 1 |
| ||
1 |
| 1 |
When installing:
•Make sure that the cables are attached to the cable guides firmly.
•When you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
Chapter 8. Removing and replacing a FRU 71