IBM Partner Pavilion iLV300 manual Settings menu, Audio menu

Settings menu

The Settings menu provides set-up type adjustments that are not changed often. Following is a list of the setting options:

vAudio: Enables you to adjust the volume of the internal speaker. Adjustments can also be made from the projector keypad and the remote. The Audio menu is shown in Figure 5-12.

Figure 5-12. Audio menu

vSources: Power-up Source determines which source the projector checks first for active video during power-up. Figure 5-13shows the Sources and Power-up Source menus.

Figure 5-13. Sources and Power-up Source menus

When the Autosource feature is on, the projector automatically finds the active source, checking the Power-up Source first. The options are

–Computer 1 (for a computer source)

–Video 1 (for S-video connections)

–Video 2 (for composite video connections)

When this feature is off, the projector defaults to the source selected in the Power-up Source menu. To display another source, you must manually select a source by pressing the Computer or Video button on the remote or keypad.

vSystem: Following are the settings from the System menu, shown in Figure 5-14.

Figure 5-14. System menu

–Rear reverses the image so you can project from behind a translucent screen.

–Ceiling turns the image upside down for ceiling-mounted projection.

–Display Messages displays status messages (such as “Searching” or “Mute”) in the lower-left corner of the screen.

Chapter 5. Using the menus 5-5