IBM Partner Pavilion iLV300 manual The following options are only for computer sources

vColor Temperature: Changes the intensity of the colors. Select a relative warmth value from the Color Temperature menu, shown in Figure 5-9.

Figure 5-9. Color Temperature menu

vColor Control: Enables you to individually adjust the gain for the red, green, and blue colors, as shown in Figure 5-10.

Figure 5-10. Color Control menu

vVideo Standard: When the video standard is set to Auto, the projector attempts to automatically pick the video standard based on the input signal it receives. (The video standard options may vary depending on your region of the world. Figure 5-11provides an example of the possible options.) If the projector is unable to detect the correct standard, the colors may not look right or the image may appear “torn.” If this happens, manually select a video standard by selecting NTSC, PAL, or SECAM from the Video Standard menu.

Figure 5-11. Video Standard menu

vOverscan: (This menu is only for video sources.) Removes noise around the video image.

The following options are only for computer sources:

vPhase: Adjusts the horizontal phase of a computer source.

vTracking: Adjusts the vertical scan of a computer source.

vHorizontal/Vertical Position: Adjusts the position of a computer source.

5-4IBM iLV300 Value Data/Video Projector: User’s Guide