Icom IC-F5061 manual Frequency Adjustment, Adjustment Adjustment Condition Unit Operation Value

6-2 FREQUENCY ADJUSTMENT

Select an adjustment item using [↑] / [↓] keys, then set to the specified value using [←] / [→] keys on the connected PC’s keyboard.

ADJUSTMENT		ADJUSTMENT CONDITION		UNIT	OPERATION	VALUE
PLL LOCK	1	Set the preset value of [LV (RX1)], [LV (RX2)] and [LV (TX)] to “204 [4.00V]” on the adjustment software.
VOLTAGE
(adjustment)	2	• Channel	: CH 1	PC	Click [Reload (F5)] button, then	4.00 V
[RX LVA1]		• Receiving		screen	check the “LVIN” item on the
					CS-F5060 ADJ’s screen as below.
[RX LVA2]	3	• Channel	: CH 2
		• Receiving
[TX LVA]	4	• Channel	: CH 2
		• Transmitting
	CONVENIENT: The “PLL LOCK VOLTAGE” can be adjusted automatically.
	1: Set the Lock voltage preset ([LV RX1], [LV RX2], [LV TX]) to “204 (4.00 V).”
	2: Put the cursor on [RX LVA1], [RX LVA2] and [TX LVA], then push the [ENTER] key on the connected PC’s keyboard.
PLL LOCK	1	• Channel	: CH 3	PC	Click [Reload (F5)] button, then	0.8–1.6 V
VOLTAGE		• Receiving		screen	check the “LVIN” item on the	(Verify)
(verify)					CS-F5060 ADJ’s screen.
	2	• Channel	: CH 4
		• Receiving
	3	• Channel	: CH 3
		• Transmitting
REFERENCE	1	• Channel	: CH 2	Top	Loosely couple a frequency	174.000000 MHz
FREQUENCY		• Connect an RF power meter to the		panel	counter to the antenna connector.
[REF]		antenna connector.
		• Transmitting

PLL LOCK VOLTAGE will be appeared here

NOTE: The above screen is an example only.

Each item’s voltage will appear when pushing [Update] button.

6 - 4