Installation
34
<Figure 3> | <Figure 4> |
Step 3 | Step 4 |
Remove the processor from the protective cover. Do not touch the bottom of the processor. The processor cover should not be discarded. Always replace the processor cover if the processor is removed from the socket.
Hold the processor with thumb and index fingers as shown. Ensure fingers align to the socket cutouts ( D ) , processor notches ( E ) align to socket convexes ( F ). Place the processor straight down without tilting or sliding in the socket.
The CPU is keyed to prevent incorrect insertion, do not force the CPU into the socket. If it does not go in easily, check for
5 | Step 5 |
Fan Clips | Place the fan heatsink onto the mainboard |
| |
| with the fasteners align to the holes. Be care |
| not to damage the thermal interface material |
| attached to the bottom of the heatsink. |
| Rotate the clips 90 degrees to lock the CPU |
| cooler in place. Connect the fan cable to the |
| mainboard header JCPU_FAN. |
<Figure 5>
Page
