Intel I945P specifications CUSB3 CUSB4

Installation

CUSB3/CUSB4: Four USB 2.0 ports

This mainboard includes additional USB2.0 ports, identified by 10-pin connector.

If you wish to use the additional USB ports, install the card-edge bracket to the system chassis then insert its cables to this 10-pin connector.

CUSB3 CUSB4

CAUTION !

If you purchased a separate USB cable make sure it has the same pin assignment. A different pin assignment may damage the system. If you need the USB cable, please contact our retailer.

CP80P: Post Port Debug LED

Provides two-digit POST code to show why the system fail to boot. Allows quick and easy optimization.

Post Port Debug 7-segment LED display (Refer to Appendix B for POST codes)

Page 3-13