Intel I945P specifications Chipest Serial ATA Setting, Onboard Devices Setup, Bios

BIOS

support Ultra DMA-33/66/100, select Auto to enable UDMA mode by BIOS. Options: Auto, Disabled.

*** Chipest Serial ATA Setting ***

Chipest Serial ATA

This sets the mode of SATA. Combined mode will force SATA to replace one of the traditional IDE Primary or Secondary ports. Enhanced mode allows Serial ATA to work simultaneously with Parallel -ATA.

Options: Disabled, Auto, Combined Mode, Enhanced Mode, SATA Only.

SATA Port Speed Settings

This item allows you to select Serial ATA port speed.

Options: Force GEN I-->1.5Gbps, Force GEN II-->3.0Gbps.

PATA IDE Mode

This option is available only when Chipset Serial ATA is in Combined mode. Assigning “Primary” will make PATA IDE the Primary port and the remaining SATA as Secondary port. Similarly, assigning “Secondary” will make PATA IDE the Secondary port and SATA as Primary port.

Options: Primary, Secondary.

Onboard Devices Setup

Scroll to Onboard Devices Setup and press <Enter>. The following screen appears:

USB Controller

Enables the USB controller.

Options: Disabled, Enabled.

USB 2.0 Controller

Enables the EHCI (USB2.0) controller.

Options: Disabled, Enabled.

Page 4-9