Intel I945P specifications Installation VGA Card Installation

Installation

3-4 VGA Card Installation

Single VGA card Installation

ŠTo install a single VGA card in Single Mode, insert the VGA into the "PCI-EXP1" VGA slot. (labeled on the board)

ŠWhen installing the VGA card, make sure the card edge connector is fully inserted into the slot and the clicker is locked properly.

<Figure 9> <Figure 10>

Dual VGA card Installation - GLI mode:(Graphics Link Interface)

The mainboard is equipped with a secondary PCI-E VGA slot to support GLI mode technology. GLI mode allows two PCI-Express VGA cards to be installed on the same mainboard to let you enjoy dual display experience. With this technology you can now expand your desktop space across two monitors or have independent display on each monitor.

ŠEnsure jumpers JPCIE1 and JPCIE2 are set to PCI-E x4 mode as described in page 3-5.

ŠTo install dual VGA card, insert both cards into PCI-E slots "PCI-EXP1" and "PCI-EXP4". Ensure the cards are secured properly using the clicker.

<Figure 11>

Page 3-8