Installation

3-2 Jumper Settings

JPCIE1

JPCIE2

JCMOS

JUSB

JCMOS: Clear CMOS data Jumper

If the CMOS data becomes corrupted or you forgot the supervisor or user password, clear the CMOS data to reconfigure the system back to the default values stored in the ROM BIOS.

Settings:

1-2: Normal (Default)

12-3: Clear CMOS

To CMOS Clear data, please follow the steps below.

1.Turn off the system.

2.Change the jumper from “1-2” to “2-3” position for a few seconds.

3.Replace the jumper back to the “1-2” position.

4.Turn on the system and hold down the <Del> key to enter BIOS setup.

JUSB: USB S3 Wake up Jumper

This jumper disconnects 5V standby voltage to USB devices. This means USB devices will not be able to wake-up the system from S3 (Suspend to RAM) power saving mode.

Settings:

1-2: Enabled (S3 enabled)

2-3: Disabled (No S3)

Page 3-4

Page 20
Image 20
Intel I945P specifications Installation Jumper Settings, Settings Normal Default Clear Cmos