Installation
This mainboard is equipped with a digital thermometer capability to monitor any temperature. This is useful for measuring heat on peripherals such as VGA cards, hard disk drives, DIMMs or even 
Thermo Stick consists of:
1) THM_ST header located on the mainboard
2) Thermostick sensor cable with
3) Thunder Probe software utility
To setup Thermo Stick, 1.Insert the sensor cable to THM_ST header on the mainboard
2.Using the adhesive sticker, affix the sensor head of the cable to your desired point of measure. e.g. the chipset as in the picture below. Trim the adhesive sticker to a suitable size so that it will not affect the heat dissipation of any heatsink.
3.Ensure the cable is neatly tucked away from fans or other moving parts. 4.Install and run the Thunder Probe software. The temperature will be shown as
below.
Page
