BIOS
Chipset IDE Devices
Scroll to Chipset IDE Devices and press <Enter>. The following screen appears:
Delay For HDD (Secs)
This item allows you to set longer time stand by before system Scan HDD at post screen. Some HDD may need a longer stand by time before it can be detected. Options: 0 ~ 15.
IDE HDD Block Mode
IDE Block Mode allows the controller to access blocks of sectors rather than a single sector at a time. The default is Enabled.
Options: Enabled, Disabled.
IDE DMA transfer access
Automatic data transfer between system memory and IDE device with minimum CPU intervention. This improves data throughput and frees CPU to perform other tasks. Options: Enabled, Disabled.
Chipset Primary (Secondary) PCI IDE
The mainboard supports one channel of ordinary IDE interface. Select “Enabled” to activate each channel separately.
If you do not use the onboard IDE connector, set the Chipset Primary (Secondary) PCI IDE to “Disabled”.
IDE Primary/Secondary Master/Slave UDMA
Select the mode of operation for the IDE drive. Ultra
Page