Note:
To run the PROSet utility at any time, go to the Adapters tab in the Network control panel and click Properties.
Install Network Drivers - Windows NT Version 4.0 Only
After enabling the ehternet controller in the computer and starting Windows NT, you need to install the correct drivers.
Installing Windows NT 4.0 Drivers
1.Double-click the Network icon in the Control Panel.
2.Click the Adapters tab.
3.Click Add. You’ll see a list of adapters.
4.Don’t select an adapter from this list. Instead, insert the Configuration and Drivers disk into your floppy drive and click Have Disk.
5.Type A:\ in the dialog box and click OK. Then follow the instructions to install the drivers. When the controller is added, you’ll see its name listed in the Network adapters list. If you’ve installed multiple PRO/ 100+ adapters, all are configured at this time.
6.Select the controller and click Properties to run PROSet and view the controller configuration. Controller hardware diagnostics are available only when the drivers aren’t loaded (before you restart your computer). Driver diagnostics are available when the drivers are loaded.
PROSet is an enhanced utility that you can use to easily configure and test your ethernet controller in Windows NT. PROSet also displays the computer resources that were assigned to each adapter installed.
7.Click OK in the main PROSet window to return to Windows NT.
8.The controller now appears as the
9.Restart Windows NT when prompted.
6 Intel EtherExpress PRO/100+ TX PCI LAN Controller User’s Guide